搜索
2
1
3
Your location:
Homepage
/
/
KM bearing | joint bearing model and application

KM bearing | joint bearing model and application

  • Categories:News
  • Author:David
  • Origin:www.kmbearings.com
  • Time of issue:2020-06-16
  • Views:0

(Summary description)Jointbearingfeatures:   1.Centripetaljointbearing   (1)theGE...TypeEsingletoouterring,nolubricationgroove.Itcanbearradialloadandsmalleraxialloadinanydirection.   (2)theGE...ESsingleslottedouterringwit

KM bearing | joint bearing model and application

(Summary description)Jointbearingfeatures:   1.Centripetaljointbearing   (1)theGE...TypeEsingletoouterring,nolubricationgroove.Itcanbearradialloadandsmalleraxialloadinanydirection.   (2)theGE...ESsingleslottedouterringwit

  • Categories:News
  • Author:David
  • Origin:www.kmbearings.com
  • Time of issue:2020-06-16
  • Views:0
Information
Joint bearing features:
 
 
 
1. Centripetal joint bearing
 
 
 
(1) the GE... Type E single to outer ring, no lubrication groove. It can bear radial load and smaller axial load in any direction.
 
 
 
(2) the GE... ES single slotted outer ring with lubricating oil groove. Application of variable speed bearings analytical bearing can withstand radial load and any direction smaller axial load.
 
 
 
(3) the GE... The ES-2RS single slotted outer ring with lubricating oil groove and sealing rings on both sides. It can bear radial load and smaller axial load in any direction.
 
 
 
(4) GEEW... The ES-2RS single slotted outer ring with lubricating oil groove and sealing rings on both sides. It can bear radial load and smaller axial load in any direction.
 
 
 
(5) the GE... ESN single slotted outer ring with lubricating oil groove and locking groove on outer ring. TIMKEN bearing quality error 5 can withstand radial loads and smaller axial loads in either direction. But when the axial load is borne by the stop ring, its ability to bear the axial load is reduced.
 
 
 
(6) the GE... XSN type double-slit outer ring (split outer ring) with lubrication oil groove and stop groove in outer ring. It can bear radial load and smaller axial load in any direction. But when the axial load is borne by the stop ring, its ability to bear the axial load is reduced.
 
 
 
(7) GE... HS type inner ring has lubrication groove, double half outer ring, clearance can be adjusted after wear. It can bear radial load and smaller axial load in any direction.
 
 
 
(8) GE... The inner ring of MODEL DE1 is hardened bearing steel, and the outer ring is bearing steel. Extrusion molding for inner ring assembly with lubricating oil groove and oil hole. Bearings with bore diameter less than 15mm, without lubricated oil groove and oil hole. It can bear radial load and smaller axial load in any direction.
 
 
 
(9) GE... DEM1 type inner ring is hardened bearing steel and outer ring is bearing steel. When the inner ring is assembled, the bearing is extruded and formed. After the bearing is loaded into the bearing seat, the ultra-precision grinding of the TIMKEN bearing ring is performed by pressing the end groove on the outer ring to fix the bearing axial direction. It can bear radial load and smaller axial load in any direction.
 
 
 
(10) GE... The DS type outer ring has assembly groove and lubrication groove. Only for large bearings. It can bear radial load and smaller axial load in either direction (one side of assembly groove cannot bear axial load).
 
 
 
Angular contact joint bearing
 
 
 
GAC... The S-shaped inner and outer rings are hardened bearing steel with oil groove and oil hole in the outer ring. Able to withstand radial loads and a directional axial () load.
 
 
 
3. Thrust joint bearing
 
 
 
GX... The S-shaped shaft ring and seat ring are hardened bearing steel. The seat ring has oil groove and oil hole. It can bear axial load or load in one direction (in this case, its radial load value should not be greater than 0.5 times the axial load value).
 
 
 
4. Rod end joint bearing
 
 
 
(1) the SI... E is the GE... Type E bearing and rod end body. Rod end with internal thread, made of carbon structural steel; No lubricating groove. Capable of bearing radial loads and axial loads less than or equal to 0.2 times radial loads in either direction.
 
 
 
(2) the SA... E is the GE... Type E bearing and rod end body. Bearing in lubrication, the rod end with external thread, material for carbon structural steel; No lubrication tank, capable of bearing radial load and axial load less than or equal to 0.2 times of radial load in either direction.
 
 
 
(3) the SI... ES type is GE... ES type bearing and rod end body. Rod end with internal thread, made of carbon structural steel; There is a lubrication tank. Capable of bearing radial loads and axial loads less than or equal to 0.2 times radial loads in either direction.
 
 
 
(4) the SA... ES type is GE... ES type bearing and rod end body. Rod end with external thread, material is carbon structural steel; There is a lubrication tank. Capable of bearing radial loads and axial loads less than or equal to 0.2 times radial loads in either direction.
 
 
 
(5) the SIB... S-shaped rod end with internal thread, the analytical material of new anti-rust process between precision bearings is carbon structural steel. The inner ring is hardened bearing steel; There is a lubrication tank. Capable of bearing radial loads and axial loads less than or equal to 0.2 times radial loads in either direction.
 
 
 
(6) SAB... S-shaped rod end with external thread, made of carbon structural steel; The inner ring is hardened bearing steel; There is a lubrication tank. Capable of bearing radial loads and axial loads less than or equal to 0.2 times radial loads in either direction.
 
 
 
(7) SQ... Type is ball head rod end joint bearing, rod end is carbon structural steel; The ball head is carburized carbon steel. It can bear radial load and smaller axial load in any direction.
 
 
 
5. Self-lubricating radial joint bearing
 
 
 
(1) the GE... C and GE... T-shaped extrusion ring, the sliding surface of the ring is sintered bronze composite. The inner ring is hardened bearing steel and the sliding surface is plated with hard chromium. Only for small bearings. The outer ring is bearing steel and the sliding surface is a layer of teflon fabric. The inner ring is hardened bearing steel and the sliding surface is plated with hard chromium. It can bear the load of invariable direction, while bearing the radial load, it can bear the smaller axial load of any direction.
 
 
 
(2) the GE... The outer ring of CS-2Z is bearing steel and the sliding surface is sintered bronze composite. The inner ring is hardened bearing steel, and the sliding surface is plated with hard chromium. Dust cover on both sides. It can bear the load of invariable direction, while bearing the radial load, it can bear the smaller axial load of any direction.
 
 
 
(3) GEEW... The t-shaped outer ring is bearing steel, and the sliding surface is a layer of teflon fabric. The technical inner ring for mounting and replacing the bearing is hardened bearing steel with hard chromium plating on the sliding surface. It can bear the load of invariable direction, while bearing the radial load, it can bear the smaller axial load of any direction.
 
 
 
(4) the GE... F type outer ring is hardened bearing steel, sliding surface is glass fiber reinforced plastic with ptFE as additive. The inner ring is hardened bearing steel and the sliding surface is plated with hard chromium. It can bear medium radial load with constant direction.
 
 
 
(5) the GE... The outer ring of Type F2 is glass fiber reinforced plastic, and the sliding surface is glass fiber reinforced plastic with polytetrafluoroethylene as additive. The inner ring is hardened bearing steel and the sliding surface is plated with hard chromium. It can bear medium radial load with constant direction.
 
 
 
(6) the GE... The FSA type outer ring is medium carbon steel and the sliding surface is polymerized
 
 
 
Tetrafluoroethylene is a glass fiber reinforced plastic wafer as an additive, which is fixed on the outer ring with a fixator. The inner ring is hardened bearing steel. For large and oversize bearings. Able to withstand large radial load.
 
 
 
(7) GE... FIH outer ring is hardened bearing steel; The inner ring is medium carbon steel. The slip surface is composed of glass fiber reinforced plastic discs with polytetrafluoroethylene as additive and fixed on the inner ring by a fixator. Double half outer ring. For large and oversize bearings. Able to withstand large radial load.
 
 
 
6. Self-lubricating angular contact joint bearings
 
 
 
GAC... F type outer ring is hardened bearing steel; The sliding surface is glass fiber reinforced plastic with polytetrafluoroethylene as additive. The inner ring is hardened bearing steel and the sliding surface is plated with hard chromium. Capable of bearing radial loads and axial () loads in one direction.
 
 
 
7. Self-lubricating thrust joint bearing
 
 
 
GX... F type seat ring is hardened bearing steel, the sliding surface is glass fiber reinforced plastic with PTFE as additive, the shaft ring is hardened bearing steel, and the sliding surface is plated with hard chromium. It can bear the axial load or load in one direction (the value of the radial load from now on shall not be greater than 0.5 times of the axial load value).
 
 
 
Self-lubricating rod end joint bearing
 
 
 
(1) the SI... C is a CE... Type C bearing and rod end body. Rod end with internal thread, made of carbon structural steel. It can bear the load with constant direction. The rolling bearing can bear axial load less than or equal to 0.2 times of radial load in any direction while bearing radial load.
 
 
 
(2) the SA... C is a CE... Type C bearing and rod end body. Rod end with external thread, material for carbon structural steel. It can bear the load with constant direction. It can bear axial load less than or equal to 0.2 times radial load in any direction while bearing radial load.
 
 
 
(3) the SI... CS - 2 z is GE... Cs-2z bearing and rod end body. Rod end with internal thread, made of carbon structural steel. It can bear axial load less than or equal to 0.2 times radial load in any direction while bearing radial load.
 
 
 
(4) the SA... CS - 2 z is GE... Cs-2z bearing and rod end body. Rod end with external thread, material for carbon structural steel. It can bear the load with constant direction. It can bear axial load less than or equal to 0.2 times radial load in any direction while bearing radial load.
 
 
 
(5) the SIB... The end of c-type rod has internal thread, the material is carbon structural steel, and the sliding surface is sintered bronze composite material. The inner ring is hardened bearing steel and the sliding surface is plated with hard chromium. It can bear radial load with constant direction.
 
 
 
(6) SAB... The vibration analysis method of rolling bearing fault diagnosis is made of carbon structural steel and sintered bronze composite. The inner ring is hardened bearing steel and the sliding surface is plated with hard chromium. It can bear radial load with constant direction.
 
 
 
(7) the SIB... F type rod with internal thread, material is carbon structural steel, sliding surface is glass fiber reinforced plastic with polytetrafluoroethylene as additive; The inner ring is hardened bearing steel and the sliding surface is plated with hard chromium. It can bear radial load with constant direction.
 
 
 
(8) SAB... F rod end with external thread, material is carbon structural steel, sliding surface is glass fiber reinforced plastic with polytetrafluoroethylene as additive; The inner ring is hard chrome plated on the sliding surface of hardened bearing steel. It can bear radial load with constant direction.
 
 
 
(9) SQ... The L-shape is made of a special self-lubricating alloy, with six points for bearing selection to withstand radial loads and smaller axial loads in either direction.
Keyword:

Scan the QR code to read on your phone

Relevant Information

Contact Us

Username used for comment:
客户留言
Description:

Contact Info

ADDRESS: Yandian Industrial Park, Linqing City, Shandong Province

Copyright: Copyright Liaocheng Kunmei Bearing Co., Ltd.  

鲁ICP备19000249号        Power by 300.cn